Call Now (702) 589-6602 Call Now (702) 589-6602
Back to BRB Electric Henderson

Electrical Panel Upgrade in Henderson, NV

If your panel trips often or looks old, it's time for an upgrade. We help Henderson homes handle modern power loads safely.

Call Now (702) 589-6602 Schedule Service
5 Stars · 26 Reviews Licensed, Bonded & Insured EV Charger & Solar Specialists
Electrical Panel Upgrade in Henderson, NV
Warning Signs

When Henderson Homes Need a Panel Upgrade

Summer highs of 108 to 112 degrees push Henderson AC units hard, and older panels can't always keep up. We see a lot of breaker trips and warm outlets during June through September. Homes in Green Valley and Green Valley Ranch built in the 1980s and 90s often still have aluminum wiring. Many also have old Federal Pacific panels that need replacing. Water Street District and Pittman area homes sometimes still run on undersized 100 amp service. Waiting on this stuff is risky. A failing panel is a fire risk, not just an inconvenience. Following proper steps matters here. This guide on upgrading to 200 amp service covers what a modern upgrade should include.

24/7
We take urgent calls any time your panel starts acting up.
Fast
Most panel upgrades finish in a single day, with power back on the same afternoon.
Clear
You get an upfront quote before we touch a single wire.
Common Triggers

Frequent Breaker Trips

If your breakers trip weekly, your panel is overloaded. This is common in older homes running modern AC units.

Old Federal Pacific or Zinsco Panels

These older panel brands are known fire hazards. We replace them often in Green Valley Ranch homes.

Adding an EV Charger

Most older panels can't handle a Level 2 charger without an upgrade first. We check capacity before install.

Solar or Battery Installs

Homes adding solar or a Tesla Powerwall in Inspirada or Cadence usually need a panel that supports the new load.

Buzzing or Warm Panel

A warm or buzzing panel means loose connections or corrosion. Desert dust makes this worse over time.

Home Additions or Remodels

New rooms, dedicated circuits, or a bigger kitchen setup often push an old panel past its limit.

Local Trust

Why Henderson Trusts Us for Panel Upgrades

An old panel doesn't get safer with time, it gets worse. Heat, dust, and years of use wear down connections fast in our climate. We move quickly because a failing panel isn't something to sit on. Calling the right crew now saves you a bigger repair bill later.

What to Expect

✓ A licensed NSCB C-2 electrician handles every job.
✓ We pull the required Henderson Building & Fire Safety permit for you.
✓ You get a clear quote before any work starts.
✓ We test the new panel fully before we leave.
Get Started

Ready for a Safer Electrical Panel?

Don't wait for a tripped breaker to turn into a bigger problem. Call BRB Electric now and we'll get your panel upgrade scheduled fast.

Call Now (702) 589-6602
Simple Steps

How Our Panel Upgrade Process Works

We keep the process simple so you know what's happening at every step.

1

Inspection and Quote

We come out, check your current panel, and figure out what size you need. You get a clear price before we start.

2

Permit and Scheduling

We pull the Henderson permit and schedule a day that works for you. Most jobs need less than a full day.

3

Install and Inspection

We swap the old panel, tie in your circuits, and test everything. The city inspector signs off before we call it done.

Fair Pricing

Electrical Panel Upgrade Cost in Henderson

Panel upgrade prices depend on your amperage needs and how much rewiring is involved. A 100 amp home moving to 200 amp costs less than a full service change. A full change with new EV or solar circuits costs more. Anthem and MacDonald Ranch homes with pool equipment and smart systems sometimes need extra circuits added at the same time. We give you a firm number after we look at your setup, so there's no guessing.

✓ Upfront pricing before we start any work.
✓ No surprise add-ons once the job is underway.
✓ You approve the scope before we touch your panel.
Typical price range
$1,800 - $4,500
Panel amperage, 100 amp to 200 amp changes cost more than smaller upgrades.
Whether your meter base or service line also needs replacing.
Adding dedicated circuits for EV chargers or solar at the same time.
Permit fees vary by scope of work with the city.
Common Questions

Electrical Panel Upgrade Questions

Here are answers to what Henderson homeowners ask us most.

  • How much does a panel upgrade cost in Henderson?

    Most upgrades run between $1,800 and $4,500. The final price depends on your amperage needs and any extra circuits you want added. We give you a firm quote after inspecting your current setup.

  • How long does a panel upgrade take?

    Most jobs finish in one day. Larger service changes with solar or EV tie-ins can take a bit longer. We'll tell you the timeline before we start.

  • Can I upgrade my own panel?

    No, panel work needs a licensed electrician in Henderson. This work touches your main service equipment and requires city inspection. A DIY panel job can void your insurance and create real fire risk.

  • How often should a panel be replaced?

    Panels usually last 25 to 40 years, but older brands like Federal Pacific or Zinsco should go sooner. If your home is from the 1980s or earlier, it's worth having us take a look.

  • How urgent is a panel upgrade?

    If your breakers trip often or the panel feels warm, treat it as urgent. These are signs of overload or failing parts. Waiting can lead to a house fire.

  • What signs mean I need a new panel?

    Frequent trips, buzzing sounds, a burning smell, or flickering lights are all warning signs. Rust or corrosion on the panel box is another red flag common with Henderson's dust and heat.

  • Do I need a permit for a panel upgrade in Henderson?

    Yes, the City of Henderson requires a permit and inspection for panel upgrades. We handle the permit paperwork for you and schedule the inspection so nothing falls through the cracks.